-
Greater strength
and durability, dent resistant, rust and corrosion
proof, ideal for coastal areas and locations with
excessive humidity.
-
Right and
Left entry points on unit for ducting pipe connection
with an additional inlet point allowing direct
vacuuming from power unit.
-
Dual
filtration compatible system, allows a choice of
filtration system.
-
Supplied
as a cyclonic ''bag less'' filtration system, utilising
a reusable foam filter cartridge for added motor
protection.
-
Also
available with a disposable paper filter bag when
fitted with an optional adaptor kit.
-
Large
capacity dirt receptacle easily emptied by releasing 2
clamping latches that provide a hermetic vacuum seal
between the motor base housing and dirt receptacle.
-
Slide on
wall mounting of power unit provides ease of
installation.
-
Single
printed circuit board control module with on/off switch
for operation inlet point on unit.
-
Terminals
for extra low voltage remote connections for inlet
points inside house and IEC type socket and 1.5m lead
for power mains connection.
-
Manufactured
to meet with all relevant electrical safety standards
in Australia and complies with the EMC emission
standard AS/NZS 1044. Power units are all marked
with the approved marking "C"Tick logo and
registration number N1461.
-
Powered
by high quality 2 stage tangential by-pass commercial
grade vacuum motors.
-
Common
body housing allows for easy vacuum motor conversion
across the entire 2000 Total Care Range.
-
Tangential
discharge of outgoing air allows unit to be fitted
with a SILENCER for added noise reduction and can be
vented outdoors for 100% filtration.
